Never store materials on the equipment.
Protect the appliance against high humidity, vapours and dust,
Major display deviations (incorrect weighing results) may be experienced
should electromagnetic fields (e.g. due to mobile phones or radio equipment),
static electricity accumulations or instable power supply occur. Change
location or remove source of interference.
Avoid static charging of the material to be weighed, weighing container and
windshield
Place the device on a firm, level surface.
Avoid jarring during weighing.
Do not expose the device to extreme dampness for longer periods of time.
Non-permitted condensation (condensation of air humidity on the appliance)
may occur if a cold appliance is taken to a considerably warmer environment.
In this case, acclimatize the disconnected appliance for ca. 2 hours at room
temperature.
Operate the device only indoors.
To Next Page
Loading...
Need help?
General
