- EtherNet/IP Compatible Network Unit DL-EP1 User’s Manual (GT2) -
2-4 Configuring Communication with the DL-EP1
2-12
2
Connection and Configuration
3
The IP address has now been set.
What is BOOTP?
BOOTP is the abbreviation of BOOT strap Protocol. This protocol is used
by the client device in the TCP/IP network to make the network settings
assigned from the server.
If there is a BOOTP server in the same network as the device running as
the BOOTP client, an IP address is assigned to the device connected as
the BOOTP client.
IP address assignment
BOOTP client BOOTP server
Via Ethernet
Ethernet
To Next Page
Loading...