2Installation
26 Keysight 11713D/E Operating and Service Manual
Initial Inspection
1 Unpack and inspect the shipping container and its contents thoroughly to ensure that nothing
was damaged during shipment. If the shipping container or cushioning material is damaged,
the contents should be checked both mechanically and electrically.
2 If the contents are damaged or defective, contact your nearest Keysight Technologies Service
and Support Office. Refer to “Sales and Technical Support” on page 7. Keysight Technologies
will arrange for repair or replacement of the damaged or defective equipment. Keep the
shipping materials for the carrier's inspection.
3 If you are returning your instrument for service, repackaging the attenuator/switch driver
requires original shipping containers and materials or their equivalents. Keysight Technologies
can provide packaging materials identical to the original materials. Refer to “Sales and
Technical Support” on page 7 for the Keysight Technologies nearest to you.
To Next Page
Loading...
