Getting Started 1
Keysight 53150A/151A/152A Operating Guide 35
Operating the Counter
The procedures in this section are designed to familiarize you with the Frequency
Counter’s features and controls. Keysight suggests that you follow the steps for
each of these procedures, even if you do not presently need to make any
measurements or to adjust any of the Counter’s settings. The following procedures
are provided:
– Turning the Counter On
– Turning the Display Backlight Off or On
– Selecting an Input Channel
– Using the Menu
– Setting the Serial Port Baud Rate
– Measuring Frequency
– Measuring Relative Frequency
– Offsetting a Frequency Measurement
– Measuring Power
– Measuring Relative Power
– Offsetting a Power Measurement
– Using Power Correction
– Setting the Measurement Rate
– Setting the Number of Averages
– Setting the Resolution
To Next Page
Loading...