Operating Your Frequency Counter 2
Keysight 53150A/151A/152A Operating Guide 65
How this Counter Works for You
The following is a list of some of the key things the Counter does for you.
– Presets the menus to default states and values at power-up
– The Counter’s Menu key and other front-panel keys allow you to select such
things as the timebase source, the GPIB address, and the RS-232 serial-port
baud rate. The Counter also allows you to store your selections in non-volatile
memory; thus, these settings are not lost when power has been off or after a
remote-interface reset.
– Automatically displays measurement(s) when you have selected a
measurement function.
– Accepts your entry for a menu item when you press the Enter key.
You must press the Enter key to complete each setting and/or selection.
– Saves user configuration settings.
To Next Page
Loading...