103
Appendix
Table of Contents:
Appendix 1. Supplemental Information for Preparation
A1-1. Download the example file-set from the Agilent web site
A1-2. How to return to Workspace management page
Appendix 2. Preparation for the Measurements using the Module Selector
A2-1. Instruments and Accessories used in the measurement examples
A2-2. Cable Connection between the B1505A and the N1259A Test Fixture
A2-3. Connection inside the N1259A Test Fixture
●
Connection for common DC measurement
●
Ic–Vceo connection with no resistor
●
Ic–Vceo connection with 100 kΩ resistor
●
Ic–Vcbo connection
●
Ie–Vebo connection
●
Cob application test connection
●
Connection for 100 kΩ resistor measurement
Appendix 3. Configuration for 40 A output
A3-1. Instruments and Accessories used for 40 A configuration
A3-2. Cable Connection between the B1505A and the N1259A Test Fixture
A3-3. EasyEXPERT configuration before starting a measurement
Appendix 4. Before returning the demo-B1505A
A4-1. Saving the measured data
A4-2. Deleting the workspace and measured data
To Next Page
Loading...
Need help?
General
