To Next Page

To Previous Page

Step number 2:

Using a 16493L GNDU Cable, connect the GNDU on the B1505A to the GNDU1

Input on the N1259A.

Step number 3:

Using a 16494A Triax Cable, connect the Force and Sense connectors on the

lower B1510A HPSMU (SMU1) to the respective connectors on the HPSMU1

input of the N1259A.

Note: HPSMU uses a pair of two triax cables. HCSMU cables look similar as

HPSMU cables, but HCSMU cables are a pair of a coax cable and a triax

cable. It is a good practice for distinguishing these two cables.

Step number 4:

Using a N1300A CMU Cable, connect the B1520A CMU to the respective connec-

tors of MF CMU Input (Hcur, Hpot, Lcur, Lpot) on the N1259A.

Note: Leave the green cable with a round terminal as it is.

Step number 5:

Using a 16493S HCSMU Cable, connect the Force and Sense connectors on the

B1512A HCSMU to the respective connectors of HCSMU1 Input on the N1259A.

Note: HCSMU cables are a pair of a coax cable and a triax cable. In case of

HPSMU, it uses a pair of two triax cables. It is a good practice for distin-

guishing these two cables.

Step number 6:

Using a 16493T HV Triax Cable, connect the Force connector on the B1513A

HVSMU to the HVSMU1 input of the N1259A

Tips:

Make sure to screw in the connector firmly by hand to the end point where

you feel some resistance.

Keysight Technologies B1505A Handbook

Other manuals for Keysight Technologies B1505A