105
This section provides the information for returning to "Workspace
management page" from current operating EasyEXPERT workspace
like as shown in figure 2-13.
When starting the EasyEXPERT software, default setting opens
Workspace management page as shown in figure 2-12.
Figure A1-1 shows how you can return to EasyEXPERT Workspace
management page.
Follow the next steps for returning to Workspace Management
page.
Step 1. Open file menu of EasyEXPERT software.
Step 2. Select "Close Workspace".
Ok/Cancel prompt pops up.
Step 3. Select "OK" in the Close Workspace prompt.
Then "Workspace management page" opens.
Step 4. Uncheck "Choose the same workspace in the next time"
check box. (Refer to figure A1-2)
Then, next time when you start the EasyEXPERT software,
you will start from selecting your operating workspace in
this page.
A1-2. How to return to Workspace management page
1. Click file
2. Select “Close
Workspace”
Ok/Cancel prompt
pops up
3. Click “OK”
Returns to Workspace
management page
Figure A1-1. How to return to Workspace Manage-
ment page.
4. Uncheck the select box.
Figure A1-2. Workspace
Management page.
To Next Page
Loading...
Need help?
General
