To Next Page

To Previous Page

120

Step number 2:

Using a 16493L GNDU Cable, connect GNDU on the B1505A to the GNDU1 Input

on the N1259A.

Step number 3:

Using a 16494A Triax Cable, connect the Force and Sense connectors on the

lower B1510A HPSMU (SMU1) to the respective connectors on the HPSMU1

input of the N1259A.

Note: HPSMU uses a pair of two triax cables. HCSMU cables looks similar as

HPSMU cables, but HCSMU cables are a pair of a coax cable and a triax

cable. It is a good practice for distinguishing these two cables.

Step number 4:

Using a N1300A CMU Cable, connect the B1520A CMU to the respective connec-

tors of MF CMU Input (Hcur, Hpot, Lcur, Lpot) on the N1259A.

Note: Leave the green cable with a round terminal as it is.

Step number 5:

Using a 16493S HCSMU Cable, connect the Force and Sense connectors on the

lower side B1512A HCSMU to the respective connectors of Master input (lower

side) of 16493S Opt 021 Dual HCSMU Combination Adapter.

Note: HCSMU cables are a pair of a coax cable and a triax cable. In case of

HPSMU, it uses a pair of two triax cables. It is a good practice for distin-

guishing these two cables.

Step number 6:

Using a 16493S HCSMU Cable, connect the Force and Sense connectors on the

upper side B1512A HCSMU to the respective connectors of Slave input (upper

side) of 16493S Opt 021 Dual HCSMU Combination Adapter.

Step number 7:

Using a 16493S Opt 021 30 cm HCSMU Cable, connect the Force and Sense out-

put connectors on the 16493S Dual HCSMU Combination Adapter (Output side)

to the respective connectors of the HCSMU1 input of the N1259A.

Step number 8:

Using a 16493T HV Triax Cable, connect the Force connector on the B1513A

HVSMU to the HVSMU1 input of the N1259A.

Tips:

Make sure to screw in the connector firmly by hand to the end point where you

feel some resistance.

Keysight Technologies B1505A Handbook

Other manuals for Keysight Technologies B1505A