14
There are other ways for using the Tracer Test mode.
Since the Tracer Test setup can be easily converted to a Classic Test setup, You can
use Tracer Test mode as an easy test setup and test debugging tool.
The example test setup features will automatically set complicated test setup, and
the interactive measurement control features help for debugging the new test setup.
Then, you can convert the completed setup to a Classic test for repeated use with a
fixed measurement parameters or adding extra display traces and analysis function-
alities such as automatic markers or lines.
This handbook introduces measurement examples of power BJT specification
mainly by using Application Test setups. However, a few examples are shown in
section 3-2 for Classic Test mode and Tracer Test mode.
To Next Page
Loading...
Need help?
General
