Keysight Technologies E4360 Series User Manual

4
Using the Solar Array Simulator
Operating in Fixed Mode ............................................................ 56
Making Measurements ............................................................... 57
Using the Protection Functions .................................................. 61
Configuring Paralleled Outputs .................................................. 63
Operating in SAS Mode .............................................................. 64
Programming Curve Lists ........................................................... 67
Operating in Table Mode ............................................................ 72
Data Logging Measurements ..................................................... 76
System-Related Operations ....................................................... 80
This chapter contains examples on how to operate your SAS from the
front panel and over the remote interface using SCPI commands.
For complete details on the SCPI (Standard Commands for
Programmable Instruments) commands, refer to the Keysight 14360A
Programmer’s Reference Guide available at
http://www.keysight.com/find/E4360 under Technical Support.
The simple examples discussed in this chapter show you how to
program:
 Fixed mode functions
 Protection functions
 SAS functions
 Table functions
 System functions
Refer to Appendix B for information about using the Digital Port on the
back of your instrument.

Keysight Technologies E4360 Series Specifications

General

Brand	Keysight Technologies
Model	E4360 Series
Category	Switch
Language	English