Prepare Instrument for Use
Initial inspection
When you receive your power supply, inspect it for any obvious damage that may have occurred during shipment. If
there is damage, notify the shipping carrier and nearest Keysight Sales and Support Office immediately. Refer to
www.keysight.com/find/assist.
Until you have checked out the power supply, save the shipping carton and packing materials in case the unit has to
be returned. Check the list under Standard Shipped Items and verify that you have received these items with your
instrument. If anything is missing, please contact your nearest Keysight Sales and Support Office.
Standard shipped items
– Keysight EDU36311A DC power supply
– AC power cord
– Quick Start Guide
– Certificate of calibration
– China RoHSAddendum
– Keysight safety leaflet
Documentation and firmware revisions
The Keysight EDU36311A documentation listed below can be downloaded for free through our website at
www.keysight.com/find/EDU36311A-manuals.
– Keysight EDU36311A Triple Output Programmable DC Power Supply User's Guide. This manual.
– Keysight EDU36311A Triple Output Programmable DC Power Supply Programming Guide.
– Keysight EDU36311A Triple Output Programmable DC Power Supply Quick Start Guide
– Keysight EDU36311A Triple Output Programmable DC Power Supply Service Guide.
For the latest firmware revision and firmware update instruction, go to www.keysight.com/find/EDU36311A-sw.
Recommended calibration interval
Keysight Technologies recommends a one year calibration cycle for the EDU36311A programmable DC power
supply.
Keysight EDU36311A User's Guide 17
To Next Page
Loading...
Need help?
General
