Keysight Technologies EDU36311A - Power on Setting; Set to Defaults

–
Press Rename to rename the selected file.
–
Press Delete to delete the selected file.
–
Press Recall to recall the instrument state from the selected storage location.
Power On Setting
Power On selects the state that will be loaded at power-up. This can be either the factory default state (Factory
Default), or user-defined states (State 0 to State 9).
Press Set Power On to save the setting.
Set to Defaults
Set to Defaults loads the instrument's factory default state.
Keysight EDU36311A User's Guide 53