EasyManuals Logo

Keysight Technologies EL34143A User Manual

Keysight Technologies EL34143A
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
IP Address
You can enter a static IP address for the instrument as a four-byte integer expressed in dot notation. Each byte is a
decimal value, with no leading zeros (for example, 192.168.2.20).
If DHCP is on, it attempts to assign an IP address to the instrument. If it fails, Auto-IP attempts to assign an IP
address to the instrument.
Contact your LAN administrator for details.
This setting is non-volatile; it will not be changed by power cycling or *RST or SYSTem:PRESet.
1. Press Utilities > I/O Config > LAN Settings > DHCP Off.
2. Select IP Address field using the navigation keys. Set the desired IP address and press Back.
3. Press Yes to save the setting.
4. Press No to cancel all the changes and exit without saving.
Subnet Mask
Subnetting allows the LAN administrator to subdivide a network to simplify administration and minimize network
traffic. The subnet mask indicates the portion of the host address used to indicate the subnet.
Contact your LAN administrator for details.
This setting is non-volatile; it will not be changed by power cycling or *RST or SYSTem:PRESet.
1. Press Utilities > I/O Config > LAN Settings > DHCP Off.
2. Select Subnet Mask field using the navigation keys. Set the desired subnet mask address and press Back.
(Example: 255.255.0.0)
3. Press Yes to save the setting.
4. Press No to cancel all the changes and exit without saving.
Gateway
A gateway is a network device that connects networks. The default gateway setting is the IP address of such a
device.
You need not set a gateway address if using DHCP.
Contact your LAN administrator for details.
This setting is non-volatile; it will not be changed by power cycling or *RST or SYSTem:PRESet.
1. Press Utilities > I/O Config > LAN Settings > DHCP Off.
2. Select Gateway field using the navigation keys. Set the appropriate gateway address and press Back.
3. Press Yes to save the setting.
4. Press No to cancel all the changes and exit without saving.
50
Keysight EL30000 Series User's Guide

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keysight Technologies EL34143A and is the answer not in the manual?

Keysight Technologies EL34143A Specifications

General IconGeneral
BrandKeysight Technologies
ModelEL34143A
CategoryAccessories
LanguageEnglish

Related product manuals