Save the data log
Press File Selection to choose between internal logging or external logging. Select Int to save the data into the
internal memory or Ext to save the data into an external USB drive.
Internal logging
If you select the internal logging option, you will need to select the filename in which to save the data log — Log 1 or
Log 2. Data will be logged to this filename the next time the Data Logger runs. If you do not specify a filename, the
data will be logged to Log 1, which is overwritten each time the Data Logger runs.
Press Log in and use the arrow keys to select the desired filename (Log 1 or Log 2). Press Log In again to save your
selection.
External logging
If you select the external logging option, you will need to specify a filename in which to save the data log. Data will be
logged to this filename the next time the Data Logger runs. If you do not specify a filename, the data will be logged
to default_log.dlog, which is overwritten each time the Data Logger runs.
Enable the Append date and time to file name checkbox to include timestamp information on the filename.
Press Save Path to browse and specify the location where the data log will be saved. Use the front-panel navigation
keys to navigate through the list. The left and right arrows contract or expand a folder to hide or show its files.
112
Keysight EL30000 Series User's Guide
To Next Page
Loading...
Need help?
General
