Utilities Menu - I/O Configuration
I/O Config configures the I/O parameters for remote operations over the LAN, USB, or GPIB (optional) interface.
USB Status displays the USB connect string for the instrument.
LAN Status displays the current LAN setting status for the instrument.
LAN Restart restarts the networking using its current LAN settings. LAN restart does not clear the user-defined
Web Interface password.
LAN Reset resets the LAN using its current settings and enables DHCP and DNS. The LAN Reset softkey also clears
any user-defined Web Interface password.
LAN Settings
LAN Settings opens the window shown below. Set to Defaults resets the LAN settings to their factory default
values.
DHCP allows DHCP assignment of the instrument’s IP address. It also enables the configuration of network
parameters based on the protocol selected. DHCP On automatically assign a dynamic IP address to a LAN device.
AutoDNS allows assignment of the DNS addresses. AutoDNS On automatically configures the addressing of the
instrument in DNS server
mDNS allows modification of the mDNS Service Name.
Hostname allows modification of the instrument's DNS hostname.
Keysight EL30000 Series User's Guide 131
To Next Page
Loading...
Need help?
General
