Keysight N9927-90001 User’s Guide 663
System Settings
Service Diagnostics
files” on page 662.
If your stored any user files to a USB or SD card, this procedure restores those
files.
From the initial Installer menu:
—Press Utility
—Then Cancel to exit without restoring your files and returning to the initial
Installer menu.
Or
Press Restore Data
— A message is displayed: “This option will COMPLETELY ERASE
existing user data. ARE YOU SURE?”
—Then No
to return to the previous menu without restoring files.
Or
Press Yes
— Then choose either SD Card or USB
A progress bar and a message is displayed: “Restoring user data…”
Service Diagnostics
— The Service diagnostics menu is generally used to display service-related
information. To access these menu items, press System 7
then Service
Diagnostics.
System Information
The System information table shows important information about your
FieldFox. The following is the most useful information:
— Model Number – FieldFox model
— Serial Number – Identification number of your FieldFox
Restoring files overwrites the existing user data on the FieldFox.
If you backup multiple versions of the user files, the FieldFox appends a
“_#” to each subsequently stored file. During restore, the file with the
highest appended number is loaded into the FieldFox
To Next Page
Loading...
