Keysight Technologies InfiniiVision 1000 X-Series User Manual

Keysight InfiniiVision 1000 X-Series Oscilloscopes User's Guide 5
• 50,000 waveforms/second update rate.
• All knobs are pushable for making quick selections.
• Trigger types: edge, pulse width, and video on EDUX1000-Series models.
DSOX1000-Series models add: pattern, rise/fall time, and setup and hold.
• Serial decode/trigger options for: I
2
C and UART/RS232 on EDUX1000-Series
models. DSOX1000-Series models add: CAN, LIN, and SPI.
• Math waveforms: add, subtract, multiply, divide, FFT (magnitude and phase),
and low-pass filter.
• Reference waveforms (2) for comparing with other channel or math waveforms.
• Many built-in measurements.
• G-suffix models have built-in waveform generator with: sine, square, ramp,
pulse, DC, noise.
• USB port makes printing, saving, and sharing data easy.
• A Quick Help system is built into the oscilloscope. Press and hold any key to
display Quick Help. Complete instructions for using the quick help system are
given in "Access the Built-In Quick Help" on page 31.
For more information about InfiniiVision oscilloscopes, see:
www.keysight.com/find/scope

Keysight Technologies InfiniiVision 1000 X-Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 1000 X-Series
Category	Test Equipment
Language	English