Keysight Technologies InfiniiVision 1000 X-Series User Manual

Quick Reference 2
Keysight InfiniiVision 1000 X-Series Oscilloscopes User's Guide 93
Probes and Accessories
For a list of the probes and accessories that are compatible with the 1000 X-Series
oscilloscopes, see the data sheet at: www.keysight.com/find/1000X-Series
Because the 1000 X-Series oscilloscopes do not have a ring around the BNC
connector for identifying probes, you must set the probe attenuation factor
manually. See "Setting Analog Channel Probe Options" on page 40.
See Also For more information on probes and accessories, see www.keysight.com for:
• Probes and Accessories Selection Guide (5989-6162EN)
• InfiniiVision Oscilloscope Probes and Accessories Selection Guide Data Sheet
(5968-8153EN)
• For compatibility information, manuals, application notes, data sheets,
selection guides, SPICE models, and more for oscilloscope probes, see the
Probe Resource Center at: www.keysight.com/find/PRC

Keysight Technologies InfiniiVision 1000 X-Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 1000 X-Series
Category	Test Equipment
Language	English