Keysight Technologies M8000 Series Getting Started Guide

10 Keysight M8040A High-Performance BERT Getting Started Guide
Contents
2 Basic Setup for M8040A
Step 1 - Unpack the Shipment 32
Return the Damaged/Defective Item to Keysight for
Repair/Replacement
33
Step 2 - Set up the M8040A 33
Step 3 - Set up the External Host Computer (not required for
M8040A-BU1) 33
Computer Hardware and Software Requirements 34
To connect via USB 35
To connect via PCIe 35
Step 4 - Connect the M9505A AXIe Chassis to a Power Supply 36
Step 5 - Power Up (if connecting via PCIe) 37
Step 6 - Verify Basic M8040A Operation 38
Step 7 - Install Keysight IO Libraries Suite (not required for
M8040A-BU1) 39
Step 8 - Install M8070A Software (not required for
M8040A-BU1) 39
Step 9 - Install the Licenses 40
Installing M8070A-0TP License (not required for M8040A-BU1) 41
Installing Temporary License (Trial License) for the M8000 Series 41
Installing M8070A-0NP Floating/Networked License 42
Installing the FlexNet License Manager 43
Installing Module Licenses (for upgrades only) 49
Transporting an M8070A License 50
Affix Option Label (optional) 50
Step 10 - Turning off the Chassis and Modules 52
Step 11 - Connect the M8040A to the Device Under Test (DUT) 52
Typical Test Setup Example 52
M9537A Embedded Controller Setup Example 53
Hardware Connections 54

Keysight Technologies M8000 Series Specifications

General

Brand	Keysight Technologies
Model	M8000 Series
Category	Test Equipment
Language	English