To Next Page

To Previous Page

54 Keysight M8040A High-Performance BERT Getting Started Guide

2 Basic Setup for M8040A

Hardware Connections

Make the hardware connections as described below:

• Connect the M8057A to M8045A channel 1 remote head control.

• Connect the M8057A to M8045A channel 1 remote head controls

(P and N).

• Ensure that the chassis is NOT powered up or connected to a power

source while making connections to M8057A.

• Terminate unused ports (TRG Out, Data Out and Clk Out) with 50 Ohm

to GND.

Default Chapter3
- Safety Summary3
- Compliance and Environmental Information6
- About this Guide7
- Table of Contents9
1 Introduction13
Introduction14
- Key Features14
- Applications14
M8040A Modules16
- M9505A Axie Chassis17
- Axie Embedded System Module (USB ESM)18
- Keysight M9537A Axie Embedded Controller Module19
- Host Computer20
M8045A High-Performance BERT Pattern Generator-Clock Module21
- M8045A Features21
- M8045A Module Components21
- M8045A Front Panel Input/Output Ports23
M8046A High-Performance BERT Analyzer Module25
- M8046A Features25
- M8046A Module Components25
- M8046A Front Panel Inputs/Outputs Ports26
M8057A Pattern Generator Remote Head28
- M8057A Remote Head Components28
2 Basic Setup for M8040A31
Step 1 - Unpack the Shipment32
- Repair/Replacement33
Step 2 - Set up the M8040A33
Step 3 - Set up the External Host Computer (Not Required for M8040A-BU1)33
- Computer Hardware and Software Requirements34
- To Connect Via USB35
- To Connect Via Pcie35
Step 4 - Connect the M9505A Axie Chassis to a Power Supply36
Step 5 - Power up (if Connecting Via Pcie)37
Step 6 - Verify Basic M8040A Operation38
Step 7 - Install Keysight IO Libraries Suite (Not Required for M8040A-BU1)39
Step 8 - Install M8070A Software (Not Required for M8040A-BU1)39
Step 9 - Install the Licenses40
- Installing M8070A-0TP License (Not Required for M8040A-BU1)41
- Installing Temporary License (Trial License) for the M8000 Series41
- Installing M8070A-0NP Floating/Networked License42
- Installing the Flexnet License Manager43
- Installing Module Licenses (for Upgrades Only)49
- Transporting an M8070A License50
- Affix Option Label (Optional)50
Step 10 - Turning off the Chassis and Modules52
Step 11 - Connect the M8040A to the Device under Test (DUT)52
- Typical Test Setup Example52
- M9537A Embedded Controller Setup Example53
- Hardware Connections54
3 Using the M8040A High-Performance BERT55
- Locating Electronic Manuals and Online Help56
- Routine Care56
- Starting the M8070A Software57
- Perform a Measurement58
- Updating Software Components66
- Contacting Keysight Service and Support66
- Quick Troubleshooting66
  - Index69

Brand	Keysight Technologies
Model	M8000 Series
Category	Test Equipment
Language	English

Keysight Technologies M8000 Series Getting Started Guide

Table of Contents

Other manuals for Keysight Technologies M8000 Series

Questions and Answers:

Keysight Technologies M8000 Series Specifications

Related product manuals