Keysight Technologies M8000 Series

To Previous Page

This information is subject to

change without notice.

Edition 4.0, June 2017

Printed in Germany

www.keysight.com

Main Page

Default Chapter3
- Safety Summary3
- Compliance and Environmental Information6
- About this Guide7
- Table of Contents9
1 Introduction13
Introduction14
- Key Features14
- Applications14
M8040A Modules16
- M9505A Axie Chassis17
- Axie Embedded System Module (USB ESM)18
- Keysight M9537A Axie Embedded Controller Module19
- Host Computer20
M8045A High-Performance BERT Pattern Generator-Clock Module21
- M8045A Features21
- M8045A Module Components21
- M8045A Front Panel Input/Output Ports23
M8046A High-Performance BERT Analyzer Module25
- M8046A Features25
- M8046A Module Components25
- M8046A Front Panel Inputs/Outputs Ports26
M8057A Pattern Generator Remote Head28
- M8057A Remote Head Components28
2 Basic Setup for M8040A31
Step 1 - Unpack the Shipment32
- Repair/Replacement33
Step 2 - Set up the M8040A33
Step 3 - Set up the External Host Computer (Not Required for M8040A-BU1)33
- Computer Hardware and Software Requirements34
- To Connect Via USB35
- To Connect Via Pcie35
Step 4 - Connect the M9505A Axie Chassis to a Power Supply36
Step 5 - Power up (if Connecting Via Pcie)37
Step 6 - Verify Basic M8040A Operation38
Step 7 - Install Keysight IO Libraries Suite (Not Required for M8040A-BU1)39
Step 8 - Install M8070A Software (Not Required for M8040A-BU1)39
Step 9 - Install the Licenses40
- Installing M8070A-0TP License (Not Required for M8040A-BU1)41
- Installing Temporary License (Trial License) for the M8000 Series41
- Installing M8070A-0NP Floating/Networked License42
- Installing the Flexnet License Manager43
- Installing Module Licenses (for Upgrades Only)49
- Transporting an M8070A License50
- Affix Option Label (Optional)50
Step 10 - Turning off the Chassis and Modules52
Step 11 - Connect the M8040A to the Device under Test (DUT)52
- Typical Test Setup Example52
- M9537A Embedded Controller Setup Example53
- Hardware Connections54
3 Using the M8040A High-Performance BERT55
- Locating Electronic Manuals and Online Help56
- Routine Care56
- Starting the M8070A Software57
- Perform a Measurement58
- Updating Software Components66
- Contacting Keysight Service and Support66
- Quick Troubleshooting66
  - Index69

Keysight Technologies M8000 Series

Table of Contents

Other manuals for Keysight Technologies M8000 Series

Related product manuals