126 Keysight CXG, EXG, and MXG X-Series Signal Generators Service Guide
Troubleshooting
Overview
Overview
This chapter is intended to address some of the most common failures. While
not all the answers may be found here, the information contained in this
chapter should give some guidance that will allow a skilled technician to
isolate the assembly at fault. If more information is needed see the chapter for
the suspect assembly for detailed information on the assembly and information
on the normal signal levels and behavior.
Power On Issues
If there are any issues with the instrument not completely powering up see
Chapter 2, “Boot Up and Initialization” for troubleshooting information.
If the instrument model or serial numbers are incorrect see Chapter 3,
“Instrument Information and Calibration Data” for detailed information on how
these are determined.
To Next Page
Loading...
Need help?
General
