Keysight E3632A User Manual

E3632A User’s Guide XIII
Parity selection (RS-232) 53
To set the GPIB address 53
To set the baud rate and parity (RS-232) 54
GPIB Interface Configuration 56
RS-232 Interface Configuration 57
RS-232 configuration overview 57
RS-232 data frame format 58
Connection to a computer or terminal 58
DTR/DSR handshake protocol 60
RS-232 troubleshooting 62
Calibration 63
Calibration security 63
To unsecure for calibration 64
To secure against calibration 65
To change the security code 66
Calibration count 67
Calibration message 68
3 Remote Interface Reference
SCPI Command Summary 70
Introduction to the SCPI Language 74
Command format used in this manual 75
Command separators 76
Using the MIN and MAX parameters 77
Querying parameter settings 77
SCPI command terminators 78
IEEE-488.2 common commands 78
SCPI parameter types 78
Simplified Programming Overview 80
Using the APPLy command 80
Using the low-level commands 80

Keysight E3632A Specifications

General

Brand	Keysight
Model	E3632A
Category	Power Supply
Language	English