14 Keysight Infiniium 90000A Series Oscilloscopes User’s Guide
1 Setting Up the Oscilloscope
Specifications and Characteristics
Declaration of Conformity
For Declarations of Conformity for Keysight products, go to
www.keysight.com/go/conformity.
Environment Indoor use only
Ambient temperature Operating: 5 °C to +40 °C
Non-operating: –40 °C to +65 °C
Humidity Operating: up to 95% relative humidity (non-condensing) at +40 °C
Non-operating: up to 90% relative humidity at +65 °C
Altitude Operating: up to 4,000 meters (12,000 feet)
Non-operating: up to 15,300 meters (50,000 feet)
Weight 19.7 kg (43.4 lbs)
Dimensions (excluding
handle)
Height: 282 mm (11.13 in), Width 432 mm (17.02 in), Depth 506 mm
(19.91 in)
Installation Category II
Power Requirements 100-240 VAC at 50-60 Hz; maximum input power 800 W
Voltage Fluctuations The mains supply voltage fluctuations are not to exceed ± 10% of the
nominal supply voltage
Pollution Degree The Infiniium 90000A Series oscilloscopes may be operated in
environments of Pollution Degree 2
Pollution Degree Definitions Pollution Degree 1: No pollution or only dry, non-conductive pollution
occurs. The pollution has no influence. Example: A clean room or
climate-controlled office environment.
Pollution Degree 2: Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation may
occur. Example: General indoor environment.
Pollution Degree 3: Conductive pollution occurs, or dry, non-conductive
pollution occurs which becomes conductive due to condensation which
is expected. Example: Sheltered outdoor environment.
The Infiniium 90000A Series oscilloscopes are heavy and awkward for a single individual to
move. It is recommended that two people use the side handles to lift and carry the
oscilloscope.
To Next Page
Loading...
