Keysight Infiniium 90000A Series Oscilloscopes User’s Guide 5
In This Guide
This user’s guide provides the information you need to begin using the Infiniium
90000A Series oscilloscopes.
Chapter 1, “Setting Up the Oscilloscope,” starting on page 9 includes power and
air flow requirements, plus other setup information.
Chapter 2, “Using the Oscilloscope,” starting on page 29 gives an overview of the
front and back panel inputs and outputs, front-panel controls, and user interface,
and tells you how to perform basic operations with the oscilloscope.
Chapter 3, “Online Help and Other Information,” starting on page 49 describes the
Infiniium oscilloscope application’s online help contents and online demos. The
online help describes how to use the Infiniium oscilloscope application in detail.
For More Information and Technical Assistance
• For detailed information on how the oscilloscope makes measurements and
how to use the oscilloscope, see the Infiniium oscilloscope application’s online
help.
• For information on controlling the oscilloscope from a remote computer, see
the Oscilloscopes Programmer’s Reference found in the Infiniium oscilloscope
application’s online help.
• For information on testing and servicing the oscilloscope, see the Service Guide
found in the Infiniium oscilloscope application’s online help.
• For technical assistance, contact your local Keysight Technologies
representative at http://www.keysight.com/find/contactus.
To Next Page
Loading...
