20 Keysight Infiniium 90000A Series Oscilloscopes User’s Guide
1 Setting Up the Oscilloscope
Connecting Oscilloscope Probes
Some optional Infiniium oscilloscope probes, such as the InfiniiMax 1130 series
probes, connect differently than other probes. Follow these steps to connect these
snap-on probes to the oscilloscope:
1 Attach the probe connector to the desired oscilloscope channel or trigger input.
Push it straight on until it latches into place.
2 Connect the probe head to the circuit of interest using the browser or other
probing accessories.
Figure 4 Attaching a probe connector
Figure 5 Probe browser
To Next Page
Loading...
