28 Keysight Infiniium 90000A Series Oscilloscopes User’s Guide
1 Setting Up the Oscilloscope
Turning Off the Oscilloscope
Press the power/standby button in the lower left corner of the oscilloscope front
panel. The oscilloscope will go through a normal Windows operating system
shutdown process.
Cleaning the Oscilloscope
Clean the Infiniium oscilloscope with a soft dry cloth or one slightly dampened
with a mild soap and water solution to clean the external case parts. Do not
attempt to clean internally.
Do not use too much liquid in cleaning the oscilloscope. Water can enter the Infiniium
panels, damaging sensitive electronic components.
To prevent electrical shock, disconnect the Infiniium oscilloscope from mains before
cleaning.
Use alcohol to clean connectors. The power cord must be removed, and the
oscilloscope must be in a well-ventilated area. Allow all residual alcohol moisture to
evaporate, and the fumes to dissipate prior to powering up the oscilloscope. Dispose
of the cleaning materials in a responsible manner.
To Next Page
Loading...
