Keysight Infiniium 90000A Series - Using Markers and Making a Measurement

Using the Oscilloscope 2
Keysight Infiniium 90000A Series Oscilloscopes User’s Guide 43
Using Markers and Making a Measurement
Use the marker and measurement controls to display and adjust markers, define a
key to perform automatic measurements or other quick actions, and make
measurements.
Making a measurement on a waveform
Click and drag a measurement icon to the waveform event you want to measure,
or click a measurement icon and specify which source you want to measure in the
dialog box that appears.
Figure 22 Front panel measure controls
Figure 23 User interface drag & drop measurements
Perform configured action
(like QuickMeas)
Drag & drop measurement
icons showing most
commonly used measurements
Expand and collapse the
measurement icons