6 Keysight InfiniiVision 1000 X-Series Oscilloscopes User's Guide
When using the oscilloscope's utility
functions, see:
• “Utility Settings" on page 83
For reference information, see: • “Specifications and Characteristics" on page 86
• “Environmental Conditions" on page 87
• “Probes and Accessories" on page 88
• “Software and Firmware Updates" on page 89
• “Acknowledgements" on page 90
Abbreviated instructions for pressing a series of keys and softkeys
Instructions for pressing a series of keys are written in an abbreviated manner. Instructions for
pressing [Key1], then pressing Softkey2, then pressing Softkey3 are abbreviated as follows:
Press [Key1]> Softkey2 > Softkey3.
The keys may be a front panel [Key] or a Softkey. Softkeys are the six keys located directly
below the oscilloscope display.
To Next Page
Loading...
Need help?
General
