Quick Reference 2
Keysight InfiniiVision 1000 X-Series Oscilloscopes User's Guide 85
When the USB mass storage device is connected to the oscilloscope's USB host
port, a small four-color circle icon may be displayed briefly as the USB device is
read.
You do not need to "eject" the USB mass storage device before removing it. Simply
ensure that any file operation you've initiated is done, and remove the USB drive
from the oscilloscope's host port.
Do not connect USB devices that identify themselves as hardware type "CD"
because these devices are not compatible with the InfiniiVision X-Series
oscilloscopes.
Configuring the [Quick Action] Key
The [Quick Action] key lets you perform common, repetitive actions by pressing a
single key.
Table 33 Quick Action Features
Feature Front Panel Key/Softkey Location (see built-in help for more information)
Quick action setup [Utility] > Quick Action > Action,
•Off
• Quick Measure All
• Quick Mask Statistics Reset — see “Mask Testing" on page 63.
•Quick Print — see “Print (Screens)" on page 82.
•Quick Save — see “Save/Recall (Setups, Screens, Data)" on page 79.
• Quick Recall
• Quick Freeze Display
•Quick Trigger Mode — see “Trigger Mode, Coupling, Reject, Holdoff" on page 49.
• Quick Clear Display
Quick action perform [Quick Action]
To Next Page
Loading...
Need help?
General
