Keysight N1914A - Tools Required

6 Repair Guide
104 Keysight N1913/1914A Service Guide
Tools Required
Keysight part number Description Visual
N1911-61004
N1912-80005
– 3 units of ¼” drive torque wrenches
– 1 unit calibrated to 2.37 Nm (21 lb-in)
– 1 unit calibrated to 1.02 Nm (9 lb-in)
– 1 unit calibrated to 0.68 Nm (6 lb-in)
– 3 units of torque screwdrivers
– 1 unit calibrated to 2.37 Nm (21 lb-in)
– 1 unit calibrated to 0.56 Nm (5 lb-in)
– 1 unit calibrated to 0.34 Nm (3 lb-in)
– T6, T8, T10, and T20 Torx screwdriver bits
– 7/16” break spanner, calibrated to
2.37 Nm (21 lb- in)
– 5/16” break spanner, calibrated to
1.02 Nm (9 lb- in)
– 9/32” socket
N1912-61807 Special tooling kit
–Contains:
–ODU socket
–Trigger socket
– 9/16” BNC socket
– Sockets must be used in conjunction with
a ¼” drive torque wrench, calibrated to
2.37 Nm (21 lb-in)
– The 9/16” BNC socket is required to
remove the Trig In/Out fasteners for the
majority of N1913/1914A power meters
– The trigger socket is required to remove
the Trig In/Out fasteners for a minority of
N1913/1914A power meters
ODU
socket
Trigger
socket
9/16” BNC
socket