6 Repair Guide
106 Keysight N1913/1914A Service Guide
Disassembly Instructions
The guidelines in this section describe the disassembly of the major assembling in
the Keysight N1913A and N1914A power meters.
Instructions Visual
This procedure focuses primarily on model N1913A and
N1914A (i. e. dual channel, with front panel sensor and power
reference connectors)
N1913A
N1914A
– Remove the handle. Rotate it to the vertical position. Pull
both sides outwards from the body of the unit.
– Remove the front/rear bumpers: Pull one side of the bumper
outwards to disengage it. Pull it away from the unit.
– Separate the clamshells (Figure 6-2): Use the T20 Torx
screwdriver bit to loosen the four captive screws.
Figure 6-2 Separate the clamshells
To Next Page
Loading...
