Keysight N1914A - Figure 6-6 Top View with Top Clamshell Removed

Repair Guide 6
Keysight N1913/1914A Service Guide 109
Key to Figure 6-6:
1 Front panel assembly
2 Calibrator assembly
3 Sensor flex connection(s)
4 Calibrator cable connection
5 Rear panel assembly
6 Line module
7 Fan assembly
8 Analog recorder output connection(s)
9 VGA cable
10 USB cable
11 PPMC assembly
12 Trigger BNC
With reference to Figure 6-6:
– Lift and remove the cable clamp.
– Disconnect the cable attaching the fan assembly to the main
board.
– Lift and remove the fan assembly
– Disconnect the sensor RF connections from the main board.
– Disconnect the sensor flex connection(s) from the main
board.
– Disconnect the calibrator cable connection from the main
board.
– Disconnect the analog recorder output connection(s) from
the main board.
Figure 6-6 Top view with top clamshell
removed
Instructions Visual
1
2
4
3
7
12
10
9
8
6
11
5