Specifications and Characteristics 1
Keysight N1913/1914A Service Guide 41
Measurement Characteristics
Measurement speed
Over the GPIB, three measurement speed modes are available as shown, along
with the typical maximum measurement speed for each mode:
– Normal: 20 readings/second
– x2: 40 readings/second
–Fast
[1]
: 400 readings/second, for Keysight E-Series power sensors only
Maximum measurement speed is obtained using binary output in free run trigger
mode.
[1] For N1914A, if both channels are used in the fast mode, the measurement speed will be reduced
to 200 readings/second for each channel.
To Next Page
Loading...
