Keysight N1914A - Table 1-1 Table

Specifications and Characteristics 1
Keysight N1913/1914A Service Guide 29
U2000/1B
–30 dBm to –5 dBm ±1.8 µW ±800 nW
–8 dBm to 15 dBm ±2 µW ±2 µW
10 dBm to 21 dBm ±12 µW ±10 µW
19 dBm to 25 dBm ±2 mW ±1 mW
23 dBm to 44 dBm ±4 mW ±2 mW
Table 1-2 Zero set (internal and external) for U2000 Series (continued)
Power sensor Range Zero set (internal) Zero set (external)
NOTE
The zero set specifications are only applicable to Keysight U2000 Series USB
power sensors with serial prefixes as shown below:
– U2000A serial prefix MY480/SG480 and above
– U2001A serial prefix MY481/SG481 and above
– U2002A serial prefix MY482/SG482 and above
– U2004A serial prefix MY484/SG484 and above
For power sensors with earlier prefixes, refer to the Keysight U2000 Series USB
Power Sensors Operating and Service Guide.