6 Repair Guide
94 Keysight N1913/1914A Service Guide
Customization details
The standard EPM Series Power Meters has an input sensor connector(s) and a
reference calibrator connector on the front panel. Option 003 is available to move
the input sensor connector(s) and reference calibrator connector to the rear panel.
Below are the customization details on the rear panel assembly.
Connector option Details Part number
N1913A (Front connectors option)
1 unit of rear panel plug (BNC)
2 units of rear panel plug (Sensor)
1 unit of rear panel plug (Calibrator)
6960-0081
6960-0024
6960-0178
N1913A (Rear connectors option)
1 unit of sensor flex assembly
1 unit of N-type connector
1 unit of lock washer
1 unit of Hex nut
1 unit of washer
1 unit of rear panel plug (BNC)
1 unit of rear panel plug (Sensor)
N1913-67300
E4418-20009
E4418-00016
2950-0132
3050-0916
6960-0081
6960-0024
N1914A (Front connectors option)
2 units of recorder output cable
2 units of rear panel plug (Sensor)
1 unit of rear panel plug (Calibrator)
E4418-61015
6960-0024
6960-0178
N1914A (Rear connectors option)
2 units of sensor flex assembly
1 unit of N-type connector
1 unit of lock washer
1 unit of Hex nut
N1912-61806
E4418-20009
E4418-00016
2950-0132
To Next Page
Loading...
