Keysight N774 C Series - Page 95

Keysight N774-C & 8162-C Series User’s Guide 95
User Interface Reference 4
Reset Network Configuration
The Configure LAN tab also allows you to reset all LAN parameters to the
factory default. To do so;
1Click the Advance Options button available on Configure LAN tab. The
Advance Network Options page will appear.
2Click on the Reset button to reset all LAN parameters to the factory
default.
WARNING
Your browser connection to the instrument may be broken after
executing the reset network configuration operation. If so, reconnect
to the instrument using the new hostname or IP address.