Keysight N9320B - Page 112

Command Reference
DISPlay Subsystem
106
Trace Y-Axis Amplitude Scaling
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision <rel_ampl>
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision?
Sets the per-division display scaling for the y-axis when y-axis
units are set to amplitude units.
*RST: 10 dB
Range: 1 to 10 dB
Key access: > Scale/Div
Trace Y-Axis Reference Level
:DISPlay:WINDow:TRACe:Y[:SCALe]:RLEVel <ampl>
:DISPlay:WINDow:TRACe:Y[:SCALe]:RLEVel?
Sets the amplitude value of the reference level for the y-axis.
*RST: 0.00 dBm
Range: –100 to 50 dBm
Default Unit: Current active units
Key access: > Ref Level
Trace Y-Axis Reference Level Offset
:DISPlay:WINDow:TRACe:Y[:SCALe]:RLEVel:OFFSet
<rel_ampl>
:DISPlay:WINDow:TRACe:Y[:SCALe]:RLEVel:OFFSet?
Sets the amplitude level offset for the y-axis.
*RST: 0 dB
Range: –327.6 to 327.6 dB
Default Unit: dB
Remarks: The sum of (reference level offset + reference level) is clipped to the
range –327.6 to 327.6 dB. The maximum limits are determined by
the first of these two parameters, within the boundaries of their
Amplitud
Amplitud