71
Command Reference
CALCulate Subsystem
Frequency Counter Marker Automatic Resolution
:CALCulate:MARKer:FCOunt:RESolution:AUTO OFF|ON|0|1
:CALCulate:MARKer:FCOunt:RESolution:AUTO?
Sets the resolution of the marker frequency counter so it is
automatically coupled to the frequency span, generating the
fastest accurate count.
*RST: On
Key access:
> Function > Freq Counter > Resolution Auto Man
Frequency Counter Marker
:CALCulate:MARKer[n]:FCOunt[:STATe] OFF|ON|0|1
:CALCulate:MARKer[n]:FCOunt[:STATe]?
Turns on or off the marker frequency counter. To query the
frequency counter, use
:CALCulate:MARKer[1]:FCOunt:X? If the
specified marker number is not the active marker, it becomes the
active marker. If the specified marker number is not on, it is turned
on and becomes the active marker. A 1 is returned only if marker
count is on and the selected number is the active marker.
*RST: Off
Remarks: If a frequency count x value is generated when the frequency count
state is off, then 0 is returned.
Key access:
> Function > Freq Counter > Freq Counter
Frequency Counter Marker Query
:CALCulate:MARKer[n]:FCOunt:X?
Queries the marker frequency counter.
Remarks: If a frequency count x value is generated when the frequency count
state is off, then 0 is returned.
To Next Page
Loading...
