Command Reference
CALCulate Subsystem
72
Marker Peak (Maximum) Search
:CALCulate:MARKer[n]:MAXimum
Performs a peak search based on the search mode settings of
:CALCulate:MARKer:PEAK:SEARch:MODE.
Key access:
> Peak Search
Marker Peak (Maximum) Left\Right Search
:CALCulate:MARKer[n]:MAXimum:LEFT
:CALCulate:MARKer[n]:MAXimum:RIGHt
Places the selected marker on the next highest signal peak to the
left/right of the current marked peak.
Remarks: The marker will be placed at the next highest peak that rises and
falls by at least the peak excursion above the peak threshold. If no
peak meets the excursion and threshold criteria, a No Peak Found
error is given.
Key access: > Next Pk Left | Right
Marker Next Peak (Maximum) Search
:CALCulate:MARKer[n]:MAXimum:NEXT
Places the selected marker on the next highest signal peak from
the current marked peak.
Remarks: The marker will be placed at the highest peak that rises and falls by
at least the peak excursion above the peak threshold. If no peak
meets the excursion and threshold criteria, a No Peak Found error
is given.
Key access: > Next Peak
To Next Page
Loading...
