75
Command Reference
CALCulate Subsystem
Threshold Hidden
:CALCulate:MARKer:PEAK:THReshold:STATe
OFF|ON|0|1
:CALCulate:MARKer:PEAK:THReshold:STATe?
Turns on or off the threshold. Selecting Off will hide the threshold
line and turn off its function.
*RST: Off
Key access: > More > Search Criteria > Peak Threshold
Peak to Peak Delta Markers
:CALCulate:MARKer[n]:PTPeak
Positions delta markers on the highest and lowest points on the
trace.
*RST: Off
Key access: > Pk-Pk Search
Turn on/off Phase Noise
:CALCulate:MARKer[n]:PHNoise:[STATe]ON|OFF|1|0
:CALCulate:MARKer[n]:PHNoise:[STATe]?
Turns on/off the phase noise function for the specified marker. To
query the value returned by the function, use
:CALCulate:MARKer:PHNoise:Y?
Remarks: When a measurement under the front panel MEAS key is started,
this command is turned off.
Key access:
> Function > Phase Noise
Set the Phase Noise Offset Manual
:CALCulate:MARKer:PHNoise:OFFSet:FREQuency
<freq>
:CALCulate:MARKer:PHNoise:OFFSet:FRRQuency?
Set the maker offset in phase noise measurement manually.
*RST: 0.00 kHz
Key access:
> Functions > Phase Noise > Offset Manual
To Next Page
Loading...
