Command Reference
Power Measurement Subsystem
108
Adjacent Channel State
[:SENSe]:ACPRatio:OFFSet:LIST:STATe
OFF|ON|0|1,OFF|ON|0|1,OFF|ON|0|1,OFF|ON|0|1,OFF|
ON|0|1,OFF|ON|0|1
[:SENSe]:ACPRatio:OFFSet:LIST:STATe?
Specifies the range of integration used in calculating the
power in the adjacent channel.
*RST: 1 MHz
Range: 300 Hz to 25 MHz
Example: :ACPRatio:OFFSet:LIST:STATe 1,1,1,1,1,1
Key access: Meas > Adj Chn State
Adjacent Channel Bandwidth
[:SENSe]:ACPRatio:OFFSet:LIST:BAND-
width|BWIDth[INTegration]
<freq>,<freq>,<freq>,<freq>,<freq>
[:SENSe]:ACPRatio:OFFSet:LIST:BAND-
width|BWIDth[INTegration]?
Specifies the bandwidth used in calculating the power in the
adjacent channel.
[:SENSe]:ACPRatio:OFFSet:LIST:BAND-
width|BWIDth[INTegration]:AUTO
OFF|ON|0|1,OFF|ON|0|1,OFF|ON|0|1,OFF|ON|0|1,OFF|
ON|0|1,OFF|ON|0|1
[:SENSe]:ACPRatio:OFFSet:LIST:BANDwidth|BWIDth[I
NTegration]:AUTO?
Set the adjacent channel bandwidth to auto mode.
*RST: 1 MHz
Range: 300 Hz to 25 MHz
Example: :ACPR:OFFS:LIST:BAND 1e6,1e6,1e6,1e6,1e6,1e6
Key access: Meas > Adj Chn BW
To Next Page
Loading...
