3
Getting Started
Remotely Operating the Analyzer
Connecting the Analyzer via the USB Port
No extra driver is required to connect the analyzer via the
USB port to a PC. All you need is the Keysight IO libraries
suite and you can find this IO libraries suite in the
documentation CD in the shipment along with your analyzer.
Or download the IO libraries suite from Keysight website:
http://www.keysight.com/find/iolib
Refer to the following steps to finish the connection:
1 Install Keysight IO libraries suite on your PC
2 Switch on the analyzer
3 Connect the analyzer to a PC with a USB cable.
Connecting instrument
Connecting PC
To Next Page
Loading...
Need help?
General
