To Next Page

To Previous Page

Command Reference

Calculate Subsystem

Marker Subsection

Markers All Off on All Traces

:CALCulate:MARKer:AOFF

Turns off all markers on all the traces.

Key access: Marker

> All Off

Continuous Peaking Marker

:CALCulate:MARKer[1]|2|3|4|5|6:CPEak[:STATe]

OFF|ON|0|1

:CALCulate:MARKer[1]|2|3|4|5|6:CPEak[:STATe]?

Toggles the continuous peak search function between on and

off.

Example: :CALCulate:MARKer1:CPEak ON

Key access: Shift > Peak > More > Continuous PK

Frequency Counter Marker

:CALCulate:MARKer[1]|2|3|4|5|6:FCOunt[:STATe]

OFF|ON|0|1

:CALCulate:MARKer[1]|2|3|4|5|6:FCOunt[:STATe]?

Turns on/off the marker frequency counter. To query the

frequency counter, use

:CALCulate:MARKer[1]:FCOunt:X? If the specified

marker number is not the active marker, it becomes the

active marker. If the specified marker number is not on, it is

turned on and becomes the active marker. A 1 is returned

only if marker count is on and the selected number is the

active marker.

*RST: Off

Remarks: If a frequency count x value is generated when the

frequency count state is off, then 0 is returned.

Example: :CALCulate:MARKer1:FCOunt 1

Key access: Marker > Function > Counter

Keysight N9322C User Manual

Questions and Answers: