Keysight N9322C - Initiate Subsystem

93
Command Reference
Calculate Subsystem
Set the limits Margin Value
:CALCulate:LLINe[1]|2:MARGin <value>
:CALCulate:LLINe[1]|2:MARGin?
Use this command to define the limits margin values.
Example: :CALCulate:LLINe1:MARGin 20
Key access: Shift > Limit > Limit 1 > More > Margin
Set Limits Margin State
:CALCulate:LLINe[1]|2:MARGin:STATe OFF|ON|0|1
:CALCulate:LLINe[1]|2:MARGin:STATe?
Use this command to turn on/off limit margin.
Example: :CALCulate:LLINe:MARGin:STATe 1
Key access: Shift > Limit > Limit 1 > More > Margin > On
Limits Statistics Threshold State
:CALCulate:LLINe[1]|2:STHReshold:STATe
OFF|ON|0|1
:CALCulate:LLINe[1]|2:STHReshold:STATe?
Use this command to turn on/off the limit threshold.
Example: :CALCulate:LLINe:STHReshold:STATe 1
Key access: Shift > Limit > Limit 1 > More > Margin > Stat. Threshold
Limits Statistics Threshold Value
:CALCulate:LLINe[1]|2:STHReshold <val>
:CALCulate:LLINe[1]|2:STHReshold?
Use this command to set and query the limits statistics
threshold value.
Example: :CALCulate:LLINe:STHReshold 10
Key access: Shift > Limit > Limit 1 > More > Margin > Stat. Threshold