Keysight N9322C User Manual

Command Reference
Spectrum Monitor Option Subsystem
126
Spectrum Monitor Option Subsystem
The spectrum monitor subsystem provides you the SCPI
commands reference for the spectrum monitor with
spectrogram record and playback function. Use the command
:INSTrument SA, and:INSTrument:MEASure
SPECtrogram to access this subsystem.
Option MNT is required to enable this function.
Spectrogram State
[:SENSe]:SPECtrogram:STATe RUN|PAUSe
[:SENSe]:SPECtrogram:STATe?
Use this command to run or pause spectrogram
measurement.
Example: :SPECtrogram:STATe PAUSe
Key access: Meas > Spectrogram Run/Pause
Spectrogram Restart Measurement
[:SENSe]:SPECtrogram:RESTart
Use this command to restart spectrogram measurement.
Example: :SPECtrogram:RESTart
Key access: Meas > Restart Meas
Spec Update Interval
[:SENSe]:SPECtrogram:UINTerval <value>
[:SENSe]:SPECtrogram:UINTerval?
This command defines the update interval of spectrogram
measurement.
Example: :SPECtrogram:UINTerval 1 s
[:SENSe]:SPECtrogram:UINTerval:STATe OFF|ON|0|1
[:SENSe]:SPECtrogram:UINTerval:STATe?
Use this command to turn on/off update interval of current
test.

Keysight N9322C Specifications

General

Brand	Keysight
Model	N9322C
Category	Measuring Instruments
Language	English