Keysight N9322C - Reflection Measurement Option Subsystem

125
Command Reference
Power Measurement Subsystem
SEM Fail Setting Hold
[:SENSe]:SEMask:FAIL:LOG OFF|ON|0|1
[:SENSe]:SEMask:FAIL:LOG?
Use this command to switch the Fail log status of SEM
measurement.
Example: :SEMask:FAIL:LOG ON
Key access: Meas > SEM > Fail Setting > Log
SEM Fail Setting Hold
[:SENSe]:SEMask:FAIL:HOLD OFF|ON|0|1
[:SENSe]:SEMask:FAIL:HOLD?
Use this command to switch the Fail hold status of SEM
measurement.
Example: :SEMask:FAIL:HOLD ON
Key access: Meas > SEM > Fail Setting > Hold
SEM Fail Setting Beep
[:SENSe]:SEMask:FAIL:BEEP OFF|ON|0|1
[:SENSe]:SEMask:FAIL:BEEP?
Use this command to switch the Fail log status of SEM
measurement.
Example: :SEMask:FAIL:BEEP ON
Key access: Meas > SEM > Fail Setting > Beep