119
Command Reference
Power Measurement Subsystem
Query SEM Marker Y Value
[:SENSe]:SEMask:MARKer[1]|2|3|4|5|6:Y?
Use this command to query the marker readout of Y axis in
SEM measurement.
Example: :SEMask:MARKer1:Y?
SEM Marker All Off
[:SENSe]:SEMask:MARKer:AOFF
Use this command to turn off all the marker in SEM
measurement.
Example: :SEMask:MARKer:AOFF
Key access: Marker > Off
SEM Offset Resolution BW
[:SENSe]:SEMask:OFFSet:LIST:BAND-
width|BWIDth[:RESolution] <real_number>,
<real_number>, <real_number>,
<real_number>,<real_number>
[:SENSe]:SEMask:OFFSet:LIST:BAND-
width|BWIDth[:RESolution]?
Use this command to specify the resolution bandwidth of
reference channels in SEM measurement.
[:SENSe]:SEMask:OFFSet:LIST:BANDwidth|BWIDth[:RE
Solution]:AUTO OFF|ON|0|1,...
[:SENSe]:SEMask:OFFSet:LIST:BANDwidth|BWIDth[:RE
Solution]:AUTO?
Use this command to turn on/off automatically setting of
resolution bandwidth of reference channel in SEM
measurement.
Example: SENSe:SEMask:OFFSet:LIST:BANDwidth 1E6, 1E6,
1E6, 1E6,1E6
Key access: Meas > Offset/Limit > Res BW
To Next Page
Loading...
