To Next Page

To Previous Page

Command Reference

Reflection Measurement Option Subsystem

134

Reflection Measurement IIM State

[:SENSe]:CAT:IIM[:STATe] OFF|ON|0|1

[:SENSe]:CAT:IIM[:STATe]?

Use this command to turn on/off the IIM state for reflection

measurement.

Example: :CAT:IIM ON

Key access: Meas > IIM

Reflection Measurement Display Type

[:SENSe]:CAT:DISPlay:TYPE RL|VSWR|LIN

[:SENSe]:CAT:DISPlay:TYPE?

Toggles the reflection measurement display mode between

RL, VSWR and LIN. The RL stands for Return Loss, and LIN

stands for Reflection Coefficient. It’s only available for

Reflection Measurement mode, and Distance to Fault

measurement mode.

Range: RL, VSWR, LIN

Example: :CAT:DISPlay:TYPE VSWR

Key access: Meas > Disp Mode

Set Reflection Measurement Cable Type

[:SENSe]:CAT:CABLe:TYPE S1000| S2000| S2500|CUST

[:SENSe]:CAT:CABLe:TYPE

Toggles the cable type between S1000, S2000, S2500 and

CUST. CUST stands for custom cable type. It’s only available

for Distance To Fault measurement.

Range: S1000, S2000, S2500, CUST

Example: :CAT:CABLe:TYPE S1000

Key access: Meas > More 1 of 2 > Cable Specification > Cable Type

Keysight N9322C User Manual

Questions and Answers: